wish list to 1.5

If you would like to see a feature implemented in HighDesign please post your suggestions and requests here.
Post Reply
User avatar
Beagle
Posts: 73
Joined: Mon Oct 10, 2005 11:54 am
Location: Belgium

wish list to 1.5

Post by Beagle »

Sheet-size.
If you choose a "Sheet-size" it means, for me, that you want to make a drawing into the format of the sheet you have chosen.
Is it not possible to limit then de workspace to that sheet size and also the rulers.
So that you can not draw outside the limits of the paper size or out of the margin side. ( The idea of a printer margin, Greet Idea !!! I love it.)

Grids
The possibility to set-up two grids.
-- One grid for horizontal and vertical offset. This grid is used for the snap functions. When the scaling is to large the grid is not show. May be an Idea to represent this grid only by the intersection points and not the grid lines.
p.e. every 0;5 mm.
-- One visible grid for horizontal and vertical, For display only on the screen.
Pe. every 5 mm.

Drawing manager.
1) The possibility to change directly with the mouse the visibility, the lock, the colour, without first selecting the layer.
2) The possibility to change the existing standard lines and hatches.
3) A button to reset the default standard values, as delivered, for lines and hatches.
Ship modelling is not a hobby, it has become a way of live. © Brian King.
Als je ouder wordt, wordt alles slechter, behalve het vergeten, dat wordt steeds beter ..

User avatar
Gat
Posts: 3
Joined: Sun Oct 23, 2005 4:40 pm
Location: Strasbourg (France)

Post by Gat »

It would be great if when associate a color to a line's thickness, it affects what you've already designed too.
The possibilty to associate the thickiness of the lines with the layers, and not only with the colors would be interessant.
An icon shorcut in order to move the sheets would be great !
The hatches in the wall are not (yet) continuous when there's an intersection, and it's not yet possible to make a clean intersection if you draw three walls in three differents directions from the same point.
Move severals vertex in the same time is currently missing.... (and not juste the entire lines)

Thanks for listening to the High Design Users !

[gAt]

Post Reply