If you would like to see a feature implemented in HighDesign please post your suggestions and requests here.
-
Beagle
- Posts: 73
- Joined: Mon Oct 10, 2005 11:54 am
- Location: Belgium
Post
by Beagle »
The posibility to have or to have the posibilty to chooce other scaling factors like
2:1 or 5:1 or 10:1
cad. a bigger drawing for very small and little objects.
Ship modelling is not a hobby, it has become a way of live. © Brian King.
Als je ouder wordt, wordt alles slechter, behalve het vergeten, dat wordt steeds beter ..
-
Andrew
- Site Admin
- Posts: 635
- Joined: Thu Apr 29, 2004 2:16 pm
- Location: Ilexsoft HQ
-
Contact:
Post
by Andrew »
You can do that now in 1.5: in the Drawing Scale dialog, type a decimal value between 0 and 1. For example:
2:1 is 1:0.5
5:1 is 1:0.2
10:1 is 1:0.1
Such values are just not displayed in the pop-up menu as they aren't commonly used, but are perfectly allowed.
-
Beagle
- Posts: 73
- Joined: Mon Oct 10, 2005 11:54 am
- Location: Belgium
Post
by Beagle »
sorry that I read this at a late date. I was to busy on a restauration job.
anyway thanks for the tip.
Ship modelling is not a hobby, it has become a way of live. © Brian King.
Als je ouder wordt, wordt alles slechter, behalve het vergeten, dat wordt steeds beter ..